LIVARNO home 384307 2107 Notice De Montage page 19

• The product offers protection from
direct sunlight outdoors. Due to
reflecting UV radiation, appropri-
ate sunscreen products should still
be used.
• Place the product on a flat, level
surface.
• Check regularly to make sure all
screws are tight!
• The manufacturer accepts no liabil-
ity for accidents which occur as a
result of ignoring the safety infor-
mation above or due to improper
handling.
Preventing damage to
the product!
• Secure the product during extreme
weather conditions, e.g. strong
winds. Store the product in a shel-
tered area.
Important pre­installa­
tion information
WARNING! For optimal stability
of the product, the floor and ceiling
brackets must be firmly screwed in
place, especially on balconies or
locations not at ground level. If the
product is not screwed to the floor
and ceiling, the manufacturer is ab-
solved of all liability.
WARNING! Before you begin
installing the product, measure the
height between the floor and the
ceiling.
WARNING! Installing the product
requires at least two people due to
its size.
WARNING! As tools/machinery
need to be used, manual skills are
indispensable.
Suitable installation site
For ceiling installation, a concrete
ceiling or a load-bearing wood-
en beam structure is suitable.
For floor installation, a concrete
foundation or concrete slab of at
least 50 x 50 x 5cm (L x W x D) is
suitable.
Note: if you attach the product
to a wooden beam structure, you
must firmly fasten the product to it
as wood warps depending on the
temperature and humidity. Enquire
at a specialist retailer about suitable
installation materials.
Note: alternative installation condi-
tions must be checked by a special-
ist company for their load-bearing
capacity and durability.
Suitable installation
materials
Before installing the product, the
installation material must be deter-
mined.
If the installation surface is
load-bearing, the appropriate in-
stallation materials for fastening the
product must be selected.
GB/IE 21