ABOX V69 Manuel D'utilisation page 9

Using ABOX Vacuum Sealing Accessories
Big vacuuming bag:
1.1. Prepare appropriate big size vacuuming bag and put item into
the bag,close the open end of bag,Make sure the bag is fully closed
and air can't enter the bag.
1.2. Take out accessories vacuum hose, insert the sharp end into the
air suction hole⑩,the end with round screw thread(screw thread
diameter 21.8mm)be connected with air outlet on the bag,make sure
it is well connected.
1.3. Connect the power supply and press vacuum seal button to
begin vacuuming procedure and the green indicator led is light up,
vacuuming will stop automatically when it is finished,.the green
indicator is off.
Containers:
2.1. Prepare appropriate size vacuuming canister and put items into
it,close the lip of canister and turn the knob on the canister into
seal,Make sure the canister is fully closed and air can't enter into it.
2.2. Take out accessories vacuum hose, insert the sharp end into the
air suction hole⑩,remove the end with round screw thread, another
sharp end will be available ( sharp end dimeter 5.2mm)and can be
inserted into the air suction hole on the canister,make sure it is well
inserted.
2.3. Connect the power supply and press vacuum seal button to
begin vacuuming procedure.The green indicator led is light up,
vacuuming will stop automatically when it is finished,.the green
indicator is off.
Notes: The vacuum sealing time is about 2 minutes.For the big size
vacuuming bag or vacuuming canisters, vacuuming may not finished
but machine stop working and green indicator is off, please press
"vacuum seal" button again to continue the vacuuming procedure
unitl it is finished,green indicator is off.
Additional function( small bag opener)
1. Take out the small bag opener from the back side of machine⑮,
prepare a sealed bag(which need to be open),
2. Cut the sealed bag.
06