Remote Control; Technical Data - Beper VE.502 Manuel D'instructions

Mist Fan Use instructions

REMOTE CONTROL

To make the remote control working, open the rear door and place the batteries (2 * AAA not included) by fol-
lowing the correct polarity, close the door. Follow the same procedure to replace the batteries when they are
exhausted.
HEAD INCLINATION
It is possible to incline the fan head in different positions, allowing you to change the airflow inclination.
Turn the fan off before changing the inclination.
Hold the motor unit and incline the fan head in snapshot to the desired position.
Caution: Do not force the movement to prevent the mechanism from breaking.
CLEANING
Before performing any cleaning, turn off the fan and disconnect the plug from the power outlet. To clean the
fan, use a soft cloth, possibly dampened with water. Do not use alcohol or chemicals such as diluents, abrasive
products in general.
Empty the tank completely and rinse it in order to avoid the formation of limestone, odor and mold.
Dry all washed / cleaned parts thoroughly before switching on the fan.

TECHNICAL DATA

Power: 75W
Power supply: 220V~ 50Hz
For any improvement reasons, Beper reserves the right to modify or improve the product without any
notice.
12