19:
ISOFIX guide (optional):
The ISOFIX guides can help identify the vehicle ISOFIX anchor points and make
installation easier.
They can also help with the protection of your vehicle seat.
20:
Press and hold ISOFIX arm adjustment buttons and extended the arms fully (a).
Engage the ISOFIX arms (b) and ensure that the ISOFIX arm security indicators are
green (c).
Push the base back until it rests firmly against the vehicle seat backrest (d).
Removal is a reversal of this procedure.
21:
Adjust the support-leg (a) until it makes firm contact with vehicle floor (b) and the
support-leg contact indicator is green (c).
Removing softgoods:
22:
If fitted, remove both the upper seat liner and the lower seat liner.
Unfasten the rear zip to access the rear compartment door (a).
Open the rear compartment door (b).
Disconnect the chest pad connector rod (c & d).
23:
Remove the chest pads (a) & crotch pad (b).
24:
Unfasten the shoulder straps from headrest fabric cover slots (a).
Disconnect the elastic loops from the headrest hooks (b).
Remove the headrest fabric cover (c).
25:
Disconnect the elastic loops from the front of the seat fabric cover (a).
Release the fabric around adjustor strap cover (b).
Release the fabric from the buckle (c).
26:
Disconnect the elastic loops from the side plastic covers (a).
Release the fabric around side impact protection blocks (b).
Open the seat fabric cover flap fully (c) then lift the seat fabric cover away from seat
unit (d).
Tuck in tool:
27:
Using the tuck in tool:
Checklist:
•
Have you check the compatibility of the child car seat with the
intended vehicle?
•
If applicable, is the air-bag de-activated?
•
Is your child car seat correctly fitted to the vehicle seat?
•
Have you check the safety indicators on ISOFIX arms, ISOFIX
support-leg?
•
Is your child correctly secure in the child car seat?
•
Is harness adequately tensioned and not twisted?
10