Sony PlayStation DualSense Edge Mode D'emploi page 14

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Customize the controller
Replace the stick module
If a stick doesn't work properly or stops working, you can
replace it with a new stick module for DualSense Edge
Wireless Controller (sold separately). Left and right stick
modules are interchangeable and can be attached to
either side.
Caution
• Replace the stick module out of the reach of young
children, as there is a danger of it being mistakenly
swallowed.
• Take care not to catch your hands in the stick
module's lever or gaps in the controller, as this may
cause injury.
• When turning the controller on, make sure the front
cover is securely attached.
Notices
• Before attaching or removing the stick module, touch
a nearby metal-grounded object to remove any static
electricity from your body. Failure to do so may cause
the stick module or controller to malfunction.
• Do not touch the connectors on the stick module or
inside the controller.
14
1
Make sure the player indicator on the
controller is off.
If the player indicator is on, press and hold the
button until it turns off.
2
Disconnect the USB cable from the controller.
3
Remove the front cover.
Slide the RELEASE latch on the back of your controller
to remove the cover.
RELEASE latch
(PS)

Publicité

Table des Matières
loading

Table des Matières