Warranty; Transfer Of The Brace; Disposal; Individual Adjustments - Albrecht MKS EXTENSA PLUS Manuel D'utilisation

User Instructions
• Contact your physician immediately in the
event of an allergic reaction.
• Please note that cushioned sections can heat
up under direct sunlight. Protect the orthosis
from direct sunlight if necessary.
• Currently there is no test for flammability.
Exercise caution when using the orthosis
in the direct vicinity of open flames such as
lighters and cigarettes.

1.11. Warranty

We assume the warranty for the brace for a
period of 3 months. The brace is a medical
rehabilitation device and must not be used
for any purpose other than the intended, as
described in the Instructions for Use. Changes
to the brace or other applications require the
written consent of the albrecht GmbH. If this
is not obtained, the manufacturer may not
honor the guarantee. If you are using single
joints or other components, these should be
used as intended. If changes or modifications
(e.g. additional mounting holes) are made
to the individual parts or components, the
manufacturer's warranty no longer applies.
The removal of or damage to the QM seal will
also void the warranty.

1.12. Transfer of the brace

The brace is not intended for single use, but
rather is intended for multiple use by a single
person. We do not recommend transfer to
other users. Should this be desired however,
please ensure to pass on the care and cleaning
instructions and have the brace checked by an
authorized specialist dealer for safe and proper
operation.

1.13. Disposal

The MKS Extensa plus
®
materials and is free from toxic or otherwise
polluting agents or substances. Provided that
it is not contaminated with infectious germs, it
can be disposed of by normal means. In order
to be certain, please consult your orthopaedics
store.

1.14. Individual adjustments

The overall height of the front and back parts
depends on the length of the aluminium rails
and the positioning of the individual plastic
modules. Once the size has been determined
using our table, the overall height can be
precisely adjusted by moving the individual
pads. The anatomically preformed aluminium
rails of the front and back parts can be
individually moulded to fit the patient and the
indication. Once this has been done the actual
mounting of the MKS
Front part:
Once the overall height has
been adjusted by moving the sternal and
symphyseal pad, the abdominal plate is
positioned. Once all the modules are in the
right position, they are fixed with the screws
provided.
www.albrechtgmbh.com
contains recyclable
Extensa plus starts.
®
13