Linea 2000 DOMO MICA DO7317M Mode D'emploi page 40

DO7317M
you just marked.
4. put the plugs (4) into the holes for the lower wall mount, using a hammer.
5. place the appliance on top of the upper wall mounting bracket. use the screws (3)
to secure the lower wall mounting bracket to the wall.
USE
READ ALL INSTRUCTIONS CAREFULLy BEFORE USING THE APPLIANCE.
1. Make sure that the thermostat knob is set to the "max"-position. Make sure that
the on/off switch is set to "off" (0). plug in the heater.
2. Switch on the appliance, the red light indicator will light up. press the function
button to select the desired heat setting (I, II or III). to start, set the heat setting to
III, so that the heater operates at full force.
3. Now turn the thermostat knob to determine the room temperature. turn clockwise
to highten the temperature, and counterclockwise to lower the temperature.
4. When the room has reached the desired temperature, the appliance will shut off
automatically and the green light indicator will light up. the appliance will switch
on again automatically when the room temperature drops lower than 3°C below
the set temperature.
5. the anti-frost setting makes sure that the room temperature will not drop below
the freezing point.
MAINTENANCE
1. Switch off the appliance, remove the plug from the socket and let the appliance
cool down before cleaning it.
2. Never immerse the plug, cord or appliance itself in water or another liquid. Never
pour water or another liquid onto the appliance.
3. use a vacuum cleaner to remove dust and dirt from the metal grid of the
appliance.
4. use a dry cloth to remove dust from the appliance. If there are stains on the
appliance, you can use a damp (not wet) cloth.
5. Do not use any detergents, abrasive products or scrubbing products on the heater.
these could damage the coating of the appliance.
STORAGE
Always store the appliance in a cool, dry place. to avoid dust on the appliance, you
can use the original packaging to store the appliance.
40