Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Features
•
On/Off and dimming via mobile app, home controller display,
button on bulb, as well as web portal.
•
Real-time power consumption report.
•
Color temperature adjusts from warm to cool (2700K- 3300K)
as brightness level increases.
•
Compatible with home control and security systems to control
lighting schedules, rules, and more.
•
OpenHome
compatible.
Package Includes
•
One Z01-CIA19 Bulb
•
User Manual
•
FCC and IC Statements
Product Specifications
•
Power: 9.8 Watts
•
Brightness: 800 lumens
•
Beam Angle: 233 degrees
•
Input: 100~120V AC, 50/60Hz, 120mA
•
Light Socket: E26
•
Operating Temperature: -20° C ~ +40° C
•
Storage Temperature: -40° C ~ +70° C
Operating Humidity: 10% ≤ RH ≤ 95%, non-condensing
•
Installation Instructions
1.
Turn the light switch to OFF position prior to installing the
LED bulb.
2.
Screw the bulb into a standard light socket (E26) and turn
the switch on. The bulb will indicate pairing mode by subtly
pulsing for up to three minutes. If needed, power cycle the
bulb to re-enter the pairing mode after three minutes.
3.
While the bulb is in pairing mode, initiate pairing from your
home control or security system. Follow the instructions
displayed on your system to complete pairing.
Operations of the button on the bulb
Set brightness/off setting via button press:
•
The bulb will cycle through different brightness levels (100% >
75% > 50% > 25% > OFF > 100%) each time the button is
pressed. The color temperature will also decrease just like your
favorite bulbs used to when dimmed:
3300K@100%
3000K@75%
2800K@50%
2700K@25%
EZ-Mode commissioning:
•
Press and hold the button for minimum 5 seconds but no
more than 10 seconds to enable EZ-Mode. The bulb will blink
to indicate that it is in this mode for three minutes. To exit this
TM
, Zigbee Alliance certified, Zigbee HA 1.2
EN
Publicité
Table des Matières
