Numatic Nusteam PRO 6 Manuel D'emploi Et D'entretien page 32

Unwind the cable from the relati-
ve cable winder hooks and insert
the plug into the socket of a suita-
ble wiring system. Unless otherwise
stated the machine is suitable for
220V- 50Hz connection (Fig. 5).
N.B. We will not be liable for any
damage caused by operating
conditions with voltages other
than required!
Make sure that the plug is ear-
thed so as to avoid any pro-
blems with the generator func-
tion
Turn on the machine using the
main switch located on the side
of the control panel. (The pres-
sed key will light up - 1 Fig. 6)
Fill the bottle supplied with
running water (A - Fig. 7)
Remove the cap on the top
part of the machine and exer-
ting a slight pressure on the
bottle, fill the tank.
The valve permits an air relea-
se and rapid filling (B - Fig. 7).
When the boiler is fi lling with wa-
ter, the indicator (2 - Fig. 6) and
the acoustic signal switch off.
English
Fig. 5
Fig. 6
Fig. 7
32
A
Easy steam
B