Troubleshooting; Warranty; Accessories And Spare Parts En - Kärcher BDS 33/180 C Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Danger
Risk of injury. Pull the plug from the mains
before carrying out any tasks on the appli-
ance.
Fault
Insufficient cleaning result
Appliance vibrates strongly
Pad does not turn

Warranty

The warranty terms published by the rele-
vant sales company are applicable in each
country. We will repair potential failures of
your appliance within the warranty period
Only use accessories and spare parts
which have been approved by the man-
ufacturer. The exclusive use of original
accessories and original spare parts
ensures that the appliance can be oper-
ated safely and trouble free.
Description
10 litre tank
Disk brush, red (medium, standard)
Disk brush, black (hard)
Shampooing brush, medium soft, white/blue
Driver plate pad
Pads, medium, red
Pads, medium hard, green
Pads, hard, black
8

Troubleshooting

Remedy
Replace contaminated pads and wash them at a
max. temperature of 60 °C.
Replace worn disc brush / pad.
Rinse contaminated disc brushes with water
Check the suitability of brush/pad and detergent for
the respective use.
Check for correct seating of disc brush/pad.
Check pad attachment.
Position the handle lower (arms outstretched).
Reset fuse of brush drive.
Check if foreign bodies are blocking the brush/pad;
remove the foreign bodies if required.
Accessories and Spare Parts
EN
In case of faults that cannot be remedied
using the table below please contact the
customer service.
free of charge, provided that such failure is
caused by faulty material or defects in man-
ufacturing. In the event of a warranty claim
please contact your dealer or the nearest
authorized Customer Service centre.
Please submit the proof of purchase.
At the end of the operating instructions
you will find a selected list of spare parts
that are often required.
For additional information about spare
parts, please go to the Service section
at www.kaercher.com.
BDS 33/180
BDS 43/180
C
8.600-062.0
6.369-890.0 8.369-895.0 6.371-206.0
6.369-893.0 6.369-898.0 6.371-265.0
6.369-891.0 6.369-896.0 6.371-266.0
6.369-894.0 6.369-899.0 6.371-208.0
6.396-905.0 6.369-470.0 6.369-079.0
6.369-906.0 6.369-472.0 6.369-078.0
6.369-907.0 6.369-473.0 6.369-077.0
– 6
BDS 51/180
C
C

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bds 43/180 cBds 51/180 c

Table des Matières