Important; Before First Use - camry Premium CR 8076 Mode D'emploi

17. Do not put electrical appliances inside the refrigerator.
18. Do not block the device's ventilation openings.
19. Protect the device against heat sources and sunlight.
20. Put cold food into the device.
21. Place the equipment in a place with adequate ventilation. The distance from other
objects should be at least 20 cm.
- WARNING: Do not obstruct the ventilation openings in the equipment enclosure or in the
built-in structure
- WARNING: Protect the cooling system from damage
- WARNING: Do not use electrical equipment inside the foodstuff storage compartment of a
type other than that recommended by the manufacturer
- WARNING: Do not store explosive substances inside the device, such as aerosol cans
with flammable propellant.
- WARNING: The equipment contains high pressure refrigerant. Do not modify the device.
The device may only be serviced by a qualified - authorized service center.
- WARNING: When positioning the machine, make sure that the power cord is not pinched
or damaged.
- WARNING: Do not place extension cords or portable power adapters on the back of this
apparatus.
Before first use: Proper location
1. Before using for the first time, remove the packaging and leave a free space of at least 15 cm around the device (5 cm on the side, 10
cm when tilting the device).
2. Position the refrigerator in a dry and well-ventilated place. Keep the refrigerator away from direct sunlight, heaters and corrosive gas.
NOTE: Because this device is compressor operation based, ample space is required around the unit to allow it to exhaust properly.
NOTE: It is not recommended to move the device if the floor is not smooth. Do not use if the refrigerator is tilted. If the refrigerator is
drawn to a place for use, please leave it upright and wait for 10 minutes before use. When moving the refrigerator, always use both
handles to the carry the unit as level as possible. This is in order to protect the compressor and the sealed system.
WARNING: Use two or more people to move and handle this unit. Failure to do so can result in back or other injury.
3. Keep the portable refrigerator away from heat and direct sunlight if possible.
4. This portable refrigerator is suitable for car use and camping however, the appliance should not be exposed to rain or any other
severe weather elements.
5. This portable refrigerator should not be placed in a built-in or recessed area. The device is designed to be freestanding.
6. The normal operation of the refrigerator depends on heat radiation from the condenser.
7. Clean the interior surface with a little bit of lukewarm water and a soft cloth.
Note: When inserting the DC power-cord, make sure the input is a 12V~DC / 24V power source.
IMPORTANT: Do not remove any safety, warning, or product information labels from your portable car refrigerator.
DEVICE DESCRIPTION Portable car refrigerator – Picture A
1. Base 2. Plug socket
3. Handle 4. Cover for refrigerator compartment
5. Cover for freezer compartment 6. Control Panel
7. DC Power Cord- For use when traveling, plug directly into car lighter.
CONTROL PANEL – Picture B
A – Power button ON/OFF
C – Temp 2 - refrigerator compartment temperature display
E – Battery protection level display
G – Temperature up button

BEFORE FIRST USE

When attempting to plug your portable freezer into a standard 12 V socket, the unit will not work if socket has a voltage of less than 9.6
V. The unit will restart when the voltage is 12.2V or greater.
When attempting to plug unit into a standard 24 V socket, the unit will not work if the socket has a voltage of less than 21.3 V. The unit
will restart when the voltage is 25.2 V or greater.
The device can also be connected to the 230V ~ 50 / 60Hz mains supply after using an external power supply (not included). The
recommended AC / DC adapter model is CR8076.1.
OPERATION
It is recommended to pack food into bags or containers intended to be in touch with food before placing it inside the refrigerator
compartment and freezer compartment.
Temperature sensor sensitivity error is +/- 1°C.
1.Switch on the device by pressing button (A) by 3 seconds. The buzzer will be hear after pressing each button on control panel. After
B – Temp 1 - freezer compartment temperature display
F - Battery protection level button
H - Temperature down button
D - RUN - compressor operation display
4