Beper P206VEN400 Mode D'emploi page 11

EN
cutting the supply cable after disconnec-
ting the plug from the socket.
Also make any dangerous parts
unserviceable, especially for
children who could play with the
appliance.
Description Fig.A
1. Front grill
2. Blade
3. Operating lights
4. ON / OFF button
5. Handle
6. Battery
7. USB Charging port
8. Charging light
9. Rear grill
10. USB cable
11. Support base
Operation
1. Open the package and check that the product is intact and that all the com-
ponents are present.
2. Insert the USB cable into the appropriate port and connect it to a charging
source.
3. The charging light will turn on and it will be red, then turn green when the
charging is complete, so remove the cable.
4. Turn on the product using the appropriate ON / OFF button placed on the
handle. Press one time the product will turn on at the lowest speed, pressing
again will select the intermediate speed, by pressing once more, you will select
the maximum speed and finally pressing a fourth time, the product will switch
off.
5. Depending on the speed selected, the corresponding operating light will
switch on.
Some warnings
The product can be charged at any time, it is not necessary to wait until the
battery is completely discharged.
Be careful not to insert any objects in the grid.
If you use the product in the presence of children, take care they will not insert
fingers inside the grid.
11