Description Of Components; Before First Use - Binatone EEJ-1555 Manuel D'instructions

that you can boil water in it again.
Do not use the device for other purposes, except for what it is
intended.
Do not use the device outdoor.
DESCRIPTION OF
COMPONENTS
Figure A:
1. Body
2. On/Off switch / Power indicator
3. Flap lid
4. Cover release button
5. Water container (1.5 l)
6. Water dispenser
7. Removable tray for drops
8. Removable metal cover of the tray for drops
9. Base with power cable

BEFORE FIRST USE

Please, check the condition of the appliance
as well as the presence of all parts and compo-
nents.
Following the instructions on use, pour the
first five portions of boiled water out to
make sure that the inside of the appliance and
the water container are absolutely clean. This
will help to remove possible residue of industrial lubrication.
OPERATING INSTRUCTIONS
1. Fully unwind the power cable of the base
and fix it in the special opening on the base (9).
Put the base on a flat, dry, horizontal surface.
2. Put the removable tray for drops (7) on the
base. The tray capacity of 250 ml is counted for
one portion of water.
3. Place the metal protection cover (8) on the
tray for drops.
Warning: do not forget to timely pour water out of the tray
for drops.
4. Fill the appliance with clean water after pressing the cover
release button (4). The capacity of water container equals to
1.5 l.
Attention: make sure that the water level is between the
maximum and minimum marks on the water-level
scale. Do not switch the appliance on if it contains
no water.
8