S&P AIRSENS CO2 Manuel D'instructions page 10

ENGLISH
Intelligent sensor available in three different versions: CO2, VOC and RH. De-
signed to create direct demand control ventilation systems. AirSens can be
linked with AC, ECOWATT (EC) fans or VFTM frequency drive.
SECURITY
Installation must be carried out by a qualifi ed professional. Make sure that the
installation complies with mechanical and electrical national regulations. Once
in service, the appliance must comply with corresponding Directives.
Do not use this device in explosive or corrosive atmospheres.
This appliance can be used by children aged
from 8 years and above and persons with re-
duced physical, sensory or mental capabilities
or lack of experience and knowledge if they
have been given supervision or instruction
concerning use of the appliance in a safe way
and understand the hazards involved. Children
must not play with the appliance. Cleaning and
user maintenance shall not be made by chil-
dren without supervision.
INSTALLATION
This device must be installed in a dry environment (IP30), over a fl at surface
through fi xing points (see Fig.4) and will require a type X installation. Height in-
stallation recommended between 1,5 and 1,8m. At the same time, it is impor-
tant to choose an installation location free of conditions that could infl uence the
measurement such as direct sun light, too close occupant proximity, air fl ow
coming from windows or doors or ventilation systems.
10