Rehau NEA HT 24 V Mode D'emploi page 54

Technical data
Operating voltage
Max switch current
Fuse
Safety**
Max no of actuators
Degree of protection
Mode of operation
Degree of contamination 2
Rated impulse voltage
Anfi freeze operation
Valve protection function 5 min/week
Dimensions frontside
Dimensions backside
Depth
Operating values
Storage temperature
Ambient temperature
Relative humidity
* Resistive load
** Following proper installation, the requirements of
the protective class will be met.
*** For power supply use a SELV-transformer.
54
Nea HT 230 V Nea HT 24 V***
230 V-AC +/- 10 % 24V-AC + 20 % - 10 %
0 2 A* 1 A*
0 63 A T 1 A T
Class II Class III
5 x 3 W
IP30
1 Y
4 kV
5 °C
88 x 88 (mm)
75 x 75 (mm)
26 (mm)
6 37 °C
-20 to 65 °C
0 to 50 °C
Max 80 %, non condensing
Insofar as the intended application deviates from that
described in the relevant Technical Information brochure, the
user must consult REHAU and must receive express written
consent from REHAU before commencing this utilization If
the user fails to do so, the sole responsibility for the utilization
shall lie with the individual user In this case, the application,
use and processing of products are beyond our control
Should a case of liability arise, however, this shall be limited
to the value of the goods delivered by us and used by you in
all cases of damage Claims arising from granted guarantees
shall become invalid in the case of intended applications that
are not described in the Technical Information brochures