1#: Wok burner(Injector: NG-ø1.80mm/Propane-1.18mm)
2#: Rapid burner(Injector: NG-ø1.52mm/Propane-0.93mm)
3#: Semi-rapid burner(Injector: NG-ø1.26mm/Propane-0.79mm)
4#: Auxiliary burner(Injector: NG-ø0.94mm/Propane-0.62mm)
This conversion kit shall be installed by a qualified service technician in
accordance with the manufacturer's instructions and all applicable codes and
requirements of the authority having jurisdiction. If the information in these
instructions is not followed exactly, a fire, explosion or production of carbon
monoxide may result causing property damage, personal injury or loss of life.
The installation is not proper and complete until the operation of the converted
appliance is checked as specified in the manufacturer's instructions supplied
with the kit.
Complete parts list identifying all components provided in the kit.
Using The Cooktop
Lighting
• Simply press the knob in, turn counterclockwise to "LITE" position.
• Press the ignition device and hold the knob till the burner is ignited.
• Before releasing knob, ensure a flame is established.
• If the burner fails to ignite, put into off position and waite for at least 30
seconds then try again.
1(844) 334-4203
19
support@thermomate.com
Original
Conversion
label
label
(Product bottom)
Fig.24
WARNING
Injector diameter:
1.80mm