Gas Connection - thermo mate GHAF302 Bref Instructions

The gas cooktop must be installed by a competent person to the relevant Gas
Standards. Please ensure that once the gas cooktop is installed, it is easily
accessible for the engineer in the event of a breakdown.
The gas cooktop is installed successfully
Note: Once the gas cooktop has been installed, it is important to remove any
protective materials, which were put on in the factory. Any gas installation must
be carried out by a competent person.

Gas Connection

Pressure regulator installation
Do not make the connection too tight.
The regulator is die-cast. Overtightening may crack the regulator resulting
in a gas leak and possible fire or explosion.
First, make sure that the pressure regulator arrow points toward the cooktop
air pipe joint, and then fasten the pressure regulator to the cooktop air pipe.
1(844) 334-4203
11
support@thermomate.com
CAUTION
WARNING
WARNING