Accessories Check; Interface & Indicators - Sharp PN-ZB03PC Manuel D'utilisation

Should any items be missing, please contact your dealer.
□ Mini OPS PC Controller board (1 piece) □ Terminal label (1 piece)
□ Instruction manual (this document)
□ Installation procedure manual (for dealers and installers)
Power lamp
■ LAN link lamp
• This unit does not support Wake on LAN function.
• If you are not connected to the network, this will be displayed in the notifi cation area on the
Windows taskbar
• If you reconnect the IP address to a diff erent network that can automatically acquire the IP
address, when turning on the power, the IP address acquisition may fail. In that case, please
reacquire the IP address in the following procedure, or turn the power of this machine off and
then on again.
1. Right-click the [Start] button and click "Command Prompt (Administrator)".
2. If the User Account Control screen appears, click [Yes].
3. Enter "ipconfi g / release" and press the [Enter] key on the keyboard.
4. Type "ipconfi g / renew" and press the [Enter] key on the keyboard.
5. Close the command prompt window.
4

Accessories Check

Interfaces & Indicators
USB terminal
Disk access lamp
LAN link lamp
1000 BASE - T：Orange, 100 BASE - TX／10 BASE - T：Green
.
LAN terminal