Unpacking And Setup; Package Contents; Installation - Atlantis NetMaster F8PoE Mode D'emploi

 Up to 1K unicast addresses entities per device, self-learning, and table
aging
 96KBytes packet buffer
 Supports IEEE 802.3x flow control for full-duplex mode ports
 Supports Back-pressure flow control for half-duplex mode ports

3. Unpacking and Setup

This chapter provides unpacking and setup information for the Switch.

3.1 Package Contents

Unpack the package and check all the items carefully. If any item contained is
damaged or missing, please contact your local dealer as soon as possible. Also,
keep the box and packing materials in case you need to ship the unit in the future.
The package should contain the following items:
 One NetMaster F8POE Switch
 One external AC Power Supply
 Rubber footpads for Desk-mount
 One Quick Start Guide (English, Italian and French)

3.2 Installation

The setup of the Switch can be performed using the following steps:
 The surface must support at least 1.5 Kg for the Switch.
 The power outlet should be within 1.82 meters (6 feet) of the Switch.

Visually inspect the DC power jack and make sure that it is fully secured
to the power adapter.
 Make sure that there is proper heat dissipation from and adequate
ventilation around the Switch. Do not place heavy objects on the
Switch.
24