General Safety Regulations - Holmatro BMC1 Mode D'emploi

EN
/i
Note
s
Switching Mode Power Supply (SMPS).
/i
Caution
Do not dispose the mains connector into the house- and
residual waste removal.
/i
WARNING
Do not expose the mains connector to damp or wet
conditions.
/i
WARNING
Do not expose the mains connector to fire, sparks or heat.
/i
Note
Read the user manual before using the mains connector.
1.3

General safety regulations

Use this equipment solely for the activities for which it was
•
designed. If you are in doubt or uncertain, always consult your
Holmatro dealer.
Replace illegible safety symbols, pictograms and information
•
labels with identical ones, available from your Holmatro dealer.
Varnished, plastic and rubber parts are not resistant to corrosive
•
acid or liquid. Except for electrical parts, rinse parts that have
come into contact with corrosive acid or liquid with a lot of water.
Consult your Holmatro dealer for a resistance list.
Prevent dirt in and on the couplers.
•
Protect equipment against sparks during welding or grinding
•
activities.
Avoid an unhealthy posture while working. It can result in physical
•
complaints.
Follow the inspection and maintenance instructions.
•
20 916.001.297_002 BMC1 / BMC2