Package Contents; How To Use - TaoTronics SOUNDSURGE 55 Mode D'emploi

Package Contents

EN
1 x TaoTronics Wireless ANC Headphones (TT-BH055)
1 x USB-C Charging Cable
1 x 3.5mm Audio Cable
1 x Airline Headphone Adapter
1 x Travel Pouch
1 x User Guide

How to Use

1. Charging
1) Connect the charging port with any USB charging adapter or active
computer USB port.
2) Charging will start automatically with the LED indicator turning red.
3) The headphones are fully charged when the LED indicator turns green.
2. Pairing
1) Make sure the headphones and your Bluetooth® device are next to each
other (within 3 feet / 1 meter).
2) Press and hold the Multifunction Button for 5 seconds to bring the headphones
into pairing mode with the LED indicator flashing blue and red.
3) Activate Bluetooth® on your phone and search for nearby Bluetooth®
connections.
4) Find "TAOTRONICS SoundSurge 55" in the search results. Tap on the name to
connect. Once connected, the LED indicator will flash blue once every 5 seconds
with a warning tone "Your headset is connected".
Note:
• Automatic Re-pairing: The Bluetooth® headphones can remember devices
paired previously. You may simply turn on the headphones and the device
(with Bluetooth activated), and they will connect to the last connected device
automatically without going into the pairing mode.
01
3. Clear Pairing History
1) If the headphones fail to pair with your Bluetooth® device, clear the pairing
history by pressing and holding the Multifunction and Volume - Buttons
simultaneously when the headphones are on until the LED indicator flashes
purple twice indicating clearing successfully. Then re-pair your Bluetooth®
device as instructed in Pairing.
2) If you want to pair the headphones with another device when already paired,
deactivate the Bluetooth® function on the paired device or remove "TAOTRON
ICS SoundSurge 55" from the Bluetooth list.
Button Control
Function Operation
Press and hold the Multifunction Button for 3s with LED
Power On indicator flashing blue 3 times and a warning tone
indicating "Power On"
Press and hold the Multifunction Button for 5s with LED
Power Off indicator flashing red twice and a warning tone
indicating "Power Off"
Bluetooth Pairing Press and hold the Multifunction Button for 5s with
a warning tone indicating "Pairing"
Press and hold the ANC Button to turn on / off the ANC
ANC On / Off function with the ANC indicator flashing orange /
turning off
When ANC is activated, each time you press the ANC
ANC Mode Button once, the three modes (Travel Mode, Office
Mode, Ambient Mode) are switched alternately.
Play / Pause /Answer / Press the Multifunction Button once
Hang up Calls
Reject Calls Press and hold the Multifunction Button for 3s
02