Sauder 415543 Instructions D'assemblage page 14

10 10
DRAWER PIN
Carefully stand the unit upright.
To insert the drawer into the unit, line up the grooves on the DRAWER SIDES (D217) with the SLIDES in the unit. Slide the drawer
into the unit until it is about 3" or 4" away from the back of the unit.
Using your hammer, gently tap two DRAWER PINS (from Step 2) into the holes in the DRAWER SIDES (D217).
NOTE: The DRAWER PINS are used as a locking system for the drawer. When the DRAWER PINS are in place, you will not be
able to remove the drawer from the unit.
Page 14
D217
www.sauder.com/services
D217
415543