Publicité
Les langues disponibles
Les langues disponibles
There should be about a 1/2" space between the head of the bolt and the leg. Refer to figure 2.
2
Drop down the tray as shown in figure 3 such that the bolt slides through the slot on the bent tabs of the tray. Refer to
3
figures 3 and 4.
Pull back the tray away from the push block so that the bolts bottom out in the end of the slot. Tighten the bolt using the
4
14mm wrench.
1/2"
Fig. 2
Fig. 3
Fig. 5
Get parts online at www.GetEarthquake.com or Call 800-345-6007 M-F 8-5 CST
5-TON ELECTRIC LOG SPLITTER STAND AND TRAY
Assembly Instructions
Fig. 4
9
Publicité
