Publicité
Step 19
Step
Insert a SLIDE CAM (10A) into the DRAWER SIDES (D132 and D138).
å
Fasten a DRAWER RIGHT (40DC) to the RIGHT DRAWER SIDE (D132)
å
and a DRAWER LEFT (40DD) to the LEFT DRAWER SIDE (D138). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #2.
NOTE: The screw head in the CAM must be visible through the slotted
å
hole in the SLIDE.
NOTE: The glides are not intended to rotate.
å
Repeat this step for the other DRAWERS.
å
2
Page 24
Glide end
10A
1
D138
GOLD 5/16" FLAT HEAD SCREW
VIEW THE DRAWER GLIDE VIDEO
3S
(24 used in this step)
422893
Screw head - turn CAM to line up holes in
the SLIDES with holes in DRAWER SIDES
10A
D132
2
www.sauder.com/service
Glide end
1
Publicité
