Sauder Adept Storage 418138 Mode D'emploi page 17

Step 13
Fasten a METAL BRACKET (4G) to the BOTTOM (E). Use
å
one BLACK 9/16" LARGE HEAD SCREW (1S).
NOTE: Be sure the edge of the METAL BRACKET is even
å
with the edge of the BOTTOM.
Fasten two TIE PLATE/DOOR STOPS (3G) to the BASE (I).
å
Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the BASE (I) to the LEGS (J and K) and BOTTOM (E).
å
Use three BLACK 9/16" LARGE HEAD SCREWS (1S) through
the TIE PLATE/DOOR STOPS and METAL BRACKET and
into the BASE.
4G
Surface without
TIE PLATE/
DOOR STOPS
www.sauder.com/services
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
K
I
E
Flat edge
1S
J
418138
3G
I
Page 17