Quick Setup
1. Please add the Hub to the app according to the Hub
Quick Start Guide.
2.
Please open the app, tap "Home" and then tap "+" in
the top right corner to enter "Add Device (Accessory)"
page. Select "Temperature and Humidity Sensor",
and add it according to instructions.
* If the connection fails, please move the accessory closer to the
Hub and try again.
Installation
Effective Range Test: Single press the reset button on
the accessory at your desired position. If the Hub makes
voice prompts, it indicates that the accessory can
communicate effectively with the Hub.
* Avoid metal surface to maximize signal strength.
Option 1: Place it directly in the desired position.