Quick Setup - Aqara MCCGQ11LM Mode D'emploi

Quick Setup

1. Before activating the accessory, please make sure you
have the Aqara Home app downloaded and Aqara hub
installed.
2. Please open the app, tap "Home" and then tap "+" in the
top right corner to enter "Add Device (Accessory)" page.
Select "Door and Window Sensor", and add it according
to instructions.
* If the connection fails, please move the accessory closer to the
Hub and try again.
Installation
E ective Range Test: Single press the reset button on the
accessory at your desired position. If the Hub makes voice
prompts, it indicates that the accessory can communicate
e ectively with the Hub.
* Avoid metal surface to maximize signal strength.