Publicité
Les langues disponibles
Les langues disponibles
English
General safety requirements
`
Read these directions for use carefully before using.
`
Keep these directions for use where they will be
accessible for all users.
`
Failure to comply with the directions for use shall
render all warranty conditions null and void and
may lead to personal injury and material damage.
`
The instrument must only be used by qualified
skilled employees.
Safety instructions
`
Follow the manufacturer's instructions and safety
instructions of the medium you are filling.
`
Damage to the respiratory tract and other organs
due to escaping or off-gassing media. Fill only in
ventilated rooms or under a suitable exhaust hood.
Wear appropriate protective clothing.
`
The instrument must only be used within the
confines of applicable material resistance and for its
designated purpose. Any other type of use will affect
the warranty/guarantee.
`
The instrument is suitable for indoor use and
manual operation. Do not expose the device to any
direct sunlight.
`
The instrument is not suitable for cleaning in a
dishwasher.
CAUTION!
Escaping liquids due to falling over or tipping of
the instrument. Bodily injury due to escaping liquid
and damage to the instrument.
`
Make certain the container is positioned with
adequate stability.
`
Do not transport with the stopcock screwed on.
Layout and function
`
The device is made of PP, PE and PTFE.
`
The device is suitable for dispensing non-crystal-
lizing liquids (without solids) from canisters and
barrels.
`
The device can be used in the temperature range of
0 - 40 °C (briefly up to 75 °C).
`
The device is pressure-resistant up to max. 2 bar at
20 °C.
Scope of delivery
1 x
Spigot
1 x
Transparent LDPE seal
Point out any damage in the packaging to the freight
forwarder/supplier immediately.
Assembly and safe usage
CAUTION!
Possible danger of breakage during operation.
`
Apply only normal manual force.
`
Do not lift the canister by the stopcock.
`
Do not suspend filling containers from the
stopcock.
1. Insert the transparent LDPE seal in the sealing
flange inside the union nut .
2. Screw the stop cock with union nut onto the
container thread (G ¾" connecting thread).
WARNING!
Danger of bodily injury due to liquid under high
pressure escaping.
`
The pressure in the canister must not exceed 2 bar.
CAUTION!
Openings and spaces on the device. Danger of crushing.
`
Be careful for spaces and openings when activa-
ting the plug.
3. Open the plug (turn anti-clockwise) and dispense
liquid.
NOTE!
When filling, ensure sufficient adequate air ventilati-
on of the container.If necessary, open the canister
lid during the filling process or use a venting valve
in screw cap, e.g. for Bürkle compact jerrycans (see
accessories).
4. Close the plug (turn clockwise).
WARNING!
Bodily injury due to escaping liquid
`
Close the stopcock completely after dispensing
(set plug to at least „zero").
`
Keep the stopcock closed when it is not in use.
`
Do not unscrew the stopcock from the container
when it is filled.
`
Empty the stopcock completely before disassembly.
Publicité
