General Information - Dimplex Willowbrook WLL20-INT Manuel D'instructions

Caution:
Some parts of this product can become very hot and cause burns. Particular attention
has to be given where children and vulnerable people are present.
Warning:
In order to avoid overheating, do not cover the appliance. Do not place material or
garments on the appliance, or obstruct the air circulation around the appliance, for instance by
curtains or furniture, as this could cause overheating and a fire risk.
The appliance carries a DO NOT COVER warning
Warning:
In order to avoid a hazard due to inadvertent resetting of the thermal cut-out, this
appliance must not be supplied through an external switching device, such as a timer, or
connected to a circuit that is regularly switched on and off by the utility.
Dimplex Opti-myst Stoves
Model: Willowbrook WLL20-INT
Thank you for choosing a Dimplex electric fire

General Information

A sudden change in temperature (for example, moving the unit from frost to a warm room) can cause
condensation of moisture inside the device and disrupt its operability when turned on.
The device, after transporting or storing at a negative temperature of outside air, must be kept in a
warm room for at least 3 hours, after which it can be put into operation
The fire incorporates a flame effect, which can be used with or without heating, so that the comforting
effect may be enjoyed at any time of the year.
A fan heater can provide heating in cold weather. A distance of 1 metre (3 feet) must be maintained
between the front of the heater and any surrounding furniture, overhanging curtains or other
obstructions.
To reduce heat loss and to prevent any chimney up draft affecting the operation of your inset fire we
recommend they the chimney flue is sealed off.
Always ensure that the appliance is sitting on a level surface.
Before connecting the appliance, check that the supply voltage is the same as that stated on the
appliance.
Only use filtered water in this appliance.
Once installed, never move this appliance or lay it on its back, without draining the water from sump
and water tank. The water tank, sump, sump lid, tank cap and air filters must be cleaned once every
2 weeks, particularly in hard water areas. If you intend not using the appliance for longer than 2
weeks, drain the water from sump and water tank and dry the sump.
Please note: Used in an environment where background noise is very low, it may be possible to
hear a sound which is related to the operation of the flame effect. This is normal and should not be
a cause for concern.
The sump and the water tank in this product are treated with a biocidal product, Silver Biocide in
order to control harmful or unwanted organisms. This conforms with the latest relevant ISO standard.
Do not drink the water from the sump or from the water tank(s)
4