Rear Side Panel Installation Procedure (Driver's Side)
Toward Rear of Vehicle
Open vehicle doors. Clean all dirt and debris from vehicle door sills and rocker panel. Use supplied alcohol wipes
where part will attach.
Peel back roughly 3" of red tape liner from the pieces of tape on the back side of rear part. Make sure red tape liner
will be accessible when part is attached to truck.
Set part in place on vehicle. Remove all red tape liners. Apply FIRM pressure to mounting locations to affix to truck.
4325 HAMILTON MILL D. • BUFORD, GA 30518 • 1-800-234-8920 (USA AND CANADA) • FAX 800-438-3788
Toward Front of Vehicle
1
2
3