JessEm MAST-R-FENCE III Guide De L'utilisateur page 8

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MOUNTING THE #04400 MAST-R-FENCE III TRACK ASSEMBLIES TO A TABLE TOP
Step 3:
Attaching the mounting angles (part #20) to the table top
Figure 3
Step 4:
Aligning fence track (part #18) to the table top
18
18
Figure 4
a.
Using two wooden spacers, at least 2" high flip your table top
19
18
19
18
upside down on a table to raise the table off your working sur-
face a couple of inches. See Figure 3.
20
20
b.
Position the left and right fence mounting angles (part #20) with
attached fence tracks (part #18) on each side of the table.
c.
With the #10-24 x ½" self tapping torx drive screws (part #19),
fasten and secure the fence mounting angle to the table. See
Figure 3.
a.
Loosen the
enough so that the fence track slides.
b.
Align the track so that the back of the track is flush with the
back of the top. See figure 4.
c.
Snug the
8
"-20 X
" socket head cap screws (part #29)
1
5
4
8
"-20 X
" socket head cap screws (part #29).
1
5
4
8

Publicité

Table des Matières
loading

Produits Connexes pour JessEm MAST-R-FENCE III

Ce manuel est également adapté pour:

04400

Table des Matières