fun pro THREE Mode D'emploi page 13

• In case of wet road surface and rain or other precipitation, the brake
does not function as usual and the driving characteristics can change. We
therefore recommend that you do not drive in wet conditions.
• Do not make any modifications to the scooter. We can only guarantee the
usual Fun Pro quality and safety in the factory state.
• Stunt scooters require regular care and maintenance. Regularly check the
condition of the headset, wheels and bearings.
• Dust and dirt can damage ball bearings, regularly clean and grease the
ball bearings. Lubricate the bearings with a light oil or special ball bearing
lubricant. Seized ball bearings must be replaced before use.
• Headsets should be regularly checked for play or wobbling as this can
damage ball bearings leading to stiffness in the steering which can be
dangerous and lead to falls. Regularly clean and grease the ball bearings.
Note: Maximum user weight is 100 kg.
To change the wheels
It is expected that wheels will become worn over time and should be replaced
when signs of wear appear. We recommend replacing both wheels at the same
time as well as the wheel bearings.
• Loosen axle with provided two Allen wrenches and remove wheel.
• Attach bearings and spacer to the new wheel.
• Fasten wheel to the frame with the axle.
• Ensure the axle is securely tightened.
EN
13