Horizon Global 76136 Instructions D'installation page 4

1. Remove ground wire – Using a 10mm socket, remove ground wire
from the inside of passenger side frame rail. Return fastener to
vehicle owner.
2. Lower spare tire for hitch installation.
3b. Spacer block installation - Using masking tape, secure the .250 x
1.75 x 2.50 spacer block (item 6) to the forward mounting hole of
hitch bracket outer surface, centering the hole in block with slot in
bracket, both sides, see figure 3.
©2017 Horizon Global Americas Inc.-
Printed in Mexico
3a. Spacer block installation - Using masking tape, secure the U-
Shaped spacer block to the inside of frame rail in the recessed
area, centered around the hole in frame, both sides. NOTE: Do
not cover ground wire hole below hitch mounting hole.
4a. Install fasteners – Feed the coiled end of fish wire through the
attachment hole and out of the access hole in frame, see fish wire
example.
Sheet 4 of 18 76136NP 10-26-17 Rev. B