Motorola RMN5104 Mode D'emploi page 6

All manuals and user guides at all-guides.com
Attaching the Bluetooth Adapter to the
radio's Universal Connector
Ensure that the radio is turned off before attaching
the Bluetooth adapter to the radio. Refer to
"Attaching the Bluetooth Adapter to the radio's
Universal Connector" on page 3 and attach the
adapter to the radio as follows:
1. Inspect the seal of the adapter to ensure that it
is not damaged and is free of contamination.
2. Align the adapter to the radio's universal
connector.
3. Looking at the antenna side of the radio, insert
the bottom hooked end of the adapter into the
bottom slot below the universal connector on
the radio.
4. While holding the adapter seated in the bottom
slot, pivot the top of the adapter towards the
radio, then engage the adapter's spring loaded
latch in the radio's top slot.
3