Hilti PSA 200 Mode D'emploi page 11

3 Description
3.1 Product 1
3.2 Use
The tablet is designed to be used to display and analyses scans made with Hilti Scan systems. Scans can
be managed in projects and subsequently transferred to a PC for data evaluation and archival.
4 Technical data
Maximum emitted transmission power in the frequency range
2400 ... 2485 MHz
Maximum emitted transmission power in the frequency range
5150 ... 5725 MHz
5 Before use
5.1 Charging and switching on
1. Charge the device fully.
2. Switch the device on by pressing the on/off button.
3. Start the PSA 200 application.
4. Before the PSA 200 application can be used you must accept the terms of the disclaimer notice displayed.
5. Press the X symbol at top right to end the PSA 200 application.
6. To switch the device off select Start → Shut down.
5.2 Activation
1. Type the activation key and your contact data.
When starting the PSA 200 application for the first time you will be required to enter your contact
data and the activation key.
2. Confirm your entries by pressing the Activate function button.
The PSA 200 application cannot be used unless your contact data and a valid activation key have
been entered.
5.3 Settings
1. Select the desired language, the desired country and the units you wish to be displayed.
When operating a brand new device you will first be requested to select the country-specific
settings.
*2149917*
@
;
=
%
&
(
)
+
§
/
:
∙
$
2149917
On/off button
Windows button
Confirmation button
Increase brightness
Reduce brightness
Mute the device
Screenshot function
Switch WLAN on/off
Touchscreen
Battery charge state
Power LED
Microphone
Light sensor
20 dBm
23 dBm
English 9