Preparation - Kohler K-2191 Guide D'installation

Spout
Centerline

1. Preparation

Install the water supplies and drain piping according to the
roughing-in information.
NOTE: The lavatory displayed in the illustration may differ from
your actual product.
Wall-Mount Bracket Installations
NOTE: The K-2191 and K-2200 lavatories can be installed on this
wall-mount bracket. The K-2203 is not suitable for wall-mount
bracket installation.
Install the lavatory according to the instructions packed with the
bracket.
Countertop Installations
Position the template on the countertop.
For Wall-Mount Faucets: Provide sufficient spout overhang into
the lavatory basin. The faucet spout length must be at least 5"
(12.7 cm) to provide proper performance.
For Countertop Faucets: Pay special attention to the spout and
handle fit clearance when locating the faucet. Use the template to
locate the faucet spout hole centerline on the countertop. This
centerline is recommended to provide adequate clearance
between the edge of the lavatory and the spout.
1018373-2-C
All manuals and user guides at all-guides.com
Backsplash
1" (2.5 cm)
Minimum
Clearance
Cut-out Line
Outside
Edge of
Lavatory
4 Kohler Co.