Sauder Registry Row 412922 Mode D'emploi page 25

Step 20
Refer to the enlarged diagram to identify the parts on the HINGES.
å
DOOR ADJUSTMENTS:
å
To adjust the DOORS from side to side (horizontal), turn the adjusting screw in or out.
å
To adjust the DOORS up and down (vertical), loosen both vertical adjustment screws. Move the DOORS up or down to the
å
desired location. Tighten the screws after making adjustments.
To adjust the DOORS in or out (depth), loosen the mounting screw one turn and move the DOORS in or out, as needed.
å
Tighten the mounting screw after making adjustments.
Adjusting screw (horizontal)
www.sauder.com/services
Mounting screw (depth)
(vertical adjustment)
412922 Page 25