Abus GWM100ME Manuel D'utilisation page 21

7. A confirmation tone sounds and the "Power"-LED is flashing for about 3 minutes
(Preheat).
8. When the "Power"-LED is constant on, the gas alarm is ready for use.
Status summary table:
Status
Self-test
Preheat
Standby
Test
ALARM
Silence
Sensor fault
End of life
Power off
Illustration
Power on
Ca. 3 minutes
Normal condition
Press "Test"key
Gas detected
Press "Test" key
when Alarm
The detector must
be replaced
The detector must
be replaced
Power wire is
unplugged,
power failure
Green LED Yellow LED Red LED Horn
On On
Flashes No
Shines No
Shines No
Shines No
Shines No
Shines Shines
Shines Shines
No No
– 21 –
Status summery table
On 1x chirp
No
-
No -
Flashes 1x chirp
Flashes Alarm
Flashes -
No 1x chirp
once per
30 sec.
No 3x chirp
per 30
seconds
No -
GB