Sunny Health & Fitness SF-RB4905 Manuel De L'utilisateur page 14

We value your experience using Sunny Health and Fitness products. For assistance with parts or
troubleshooting, please contact us at support@sunnyhealthfitness.com
(877-907-8669).
STEP 6：
Connect Middle Wire (No. 78) with
Needle Sensor Wire (No. 79) and
connect the Hand Pulse Wire 2 (No. 81)
with Hand Pulse Wire 3 (No. 82).
Pull Tension Wire (No. 73) out from Main
Frame (No. 1), then insert Tension Wire
(No. 73) from the bottom of Front Post
(No. 2) and pull it out from the side hole of
Front Post (No. 2).
Attach the Front Post (No. 2) to the Main
Frame (No. 1), then remove Bolt (No. 35)
and Washer
Control Knob (No. 72) using Allen
Wrench (No. B).
Connect Tension Control Knob (No. 72)
with Tension Wire (No. 73) and attach
Tension Control Knob (No. 72) on Front
Post (No. 2) using Bolt (No. 35) and
Washer (No. 36) that were removed.
Tighten and secure with Allen Wrench
(No. B).
CAUTION:
Tension Control Knob (No. 72) is at the
lowest resistance level (level 1, all the way
to the left) before you connect any wires
together.
Secure Front Post (No. 2) and Main
Frame (No. 1) using 4 Bolts (No. 21), 2
Flat Washers (No. 23) and 2 Arc
Washers (No. 26). Tighten and secure
with Allen Wrench (No. B).
13
or 1-877-90SUNNY
(No.36) from
Please make sure
Tension
the