Publicité
9 9
J
H
C
H
(12 used)
Q
To cover screws
R
(8 used)
S
Push the RUBBER SLEEVES (S) over the METAL PINS (R). Insert the METAL PINS into the hole locations of your choice in the
RIGHT END (A) and UPRIGHT (C). Set the ADJUSTABLE SHELVES (H) onto the METAL PINS.
Cover all the visible SCREWS with a SCREW COVER (Q). Center a COVER over the head of each SCREW and press firmly.
Set the ROD (J) onto the ROD HANGERS.
413329
www.sauder.com/services
Page 13
Publicité
