Samsung 6 Serie Mode D'emploi page 14

Basic Features
Economical Solutions
¦
ECO Solution
Energy Saving (Off / Low / Medium / High / Picture
■
t
: Adjust the brightness of the TV
Off / Auto)
in order to reduce power consumption. If you select
Picture Off, the screen is turned off, but the sound
remains on. Press any button except volume button to
turn on the screen.
ECO Sensor (Off / On)
■
savings; the picture settings will automatically adapt to
the light in the room.
✎
If you adjust the Backlight, the Eco Sensor will
be set to Off.
Min Backlight: When ECO sensor is On, the minimum
screen brightness can be adjusted manually.
✎
If Eco Sensor is On, the display brightness may
change (become slightly darker in most cases)
depending on the surrounding light intensity.
No Signal Power Off (Off / 15 min / 30 min / 60 min)
■
Activates the Stand-by mode, in the case of "No Signal"
or "Check Signal Cable" status for a certain period of
time defined by the user.
✎
Disabled when the PC is in power saving mode.
Changing the Picture Options
¦
Advanced Settings
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including
colour and contrast.
✎
In PC mode, you can only make changes to
Contrast, Gamma and White Balance.
Advanced Settings
Black Tone : Off
Dynamic Contrast : Medium
Shadow Detail : 0
Gamma : 0
Expert Pattern : Off
rGB Only Mode : Off
Colour Space : Native
U Move E Enter R return
Black Tone (Off / Dark / Darker / Darkest)
■
black level to adjust the screen depth.
Dynamic Contrast (Off / Low / Medium / High)
■
the screen contrast.
14
English
All manuals and user guides at all-guides.com
: To enhance your power
Dynamic
►
▼
: Select the
: Adjust
Shadow Detail (-2~+2)
■
✎
Disabled under PC mode.
: Adjust the primary colour intensity.
Gamma
■
Expert Pattern (Off / Pattern 1 / Pattern 2)
■
running the Expert Pattern function, the picture can be
calibrated without a generator or filter. If the OSD menu
disappears or a menu other than the Picture menu is
opened, the calibration is saved and the Expert Pattern
window disappears.
✎
While the Expert Pattern is running, sound is not
output.
✎
Only enabled in DTV, Component and HDMI modes.
RGB Only Mode (Off / Red / Green / Blue): You can
■
adjust Colour or Tint of Red, Green or Blue for the
picture from an external device (DVD player, home
theatre, etc.).
Colour Space (Auto / Native / Custom)
■
range of colours available to create the image. To adjust
Colour, Red, Green, Blue and Reset, set Colour
Space to Custom.
: Adjust the colour temperature for a
White Balance
■
:
more natural picture.
R-Offset / G-Offset / B-Offset: Adjust each colour's
(red, green, blue) darkness.
R-Gain/G-Gain/B-Gain: Adjust each colour's
(red, green, blue) brightness.
Reset: Resets the White Balance to it's default settings.
10p White Balance (Off / On)
■
balance in 10 point interval by adjusting the red, green,
and blue brightness.
✎
Available when the picture mode is set to
and when the external input is set to all input.
✎
Some external devices may not support this
function.
Interval: Select interval to adjust.
Red: Adjust the red level.
Green: Adjust the green level.
Blue: Adjust the blue level.
Reset: Resets the 10p White Balance to its default
settings.
: Emphasize pink "Flesh Tone."
Flesh Tone
■
Edge Enhancement (Off / On)
■
boundaries.
xvYCC (Off / On)
■
increases detail and colour space when watching movies
from an external device (e.g. DVD player) connected to
the HDMI or Component IN jacks.
✎
Available when the picture mode is set to
and when the external input is set to HDMI or
Component.
✎
Some external devices may not support this
function.
: Increase the brightness of dark images.
: By
: Adjust the
: Controls the white
: Emphasize object
: Setting the xvYCC mode on
Movie
Movie