Maintenance And Care - Qilive Q.1708 Manuel D'utilisation

Notes:
• Press the button to switch between the Bluetooth and AUX-IN
modes.
• Volume controls can be controlled on a connected device and
Bluetooth speaker. Ensure the volume is at a suitable level.
5.7 Light control
Press the power button
5.8 Voice assistant
Press the button twice quickly to activate the voice assistant.
5.9 Disconnecting
Press and hold the
speaker from the paired device.
5.10 Charging
• Connect the small end of the Micro USB charging cable (included) to
the Micro USB port located on the bottom of the speaker.
• Connect the larger end of the cable to your computer's USB port or
an AC adaptor (not included).
The LED indicator light will be lit in red while charging. The LED will turn
off when the speaker is fully charged.
6.

MAINTENANCE AND CARE

Ensure the speaker is switched off and disconnected from the power
outlet before cleaning or storing.
1. Wipe with a dry cloth to clean.
2. Never immerse the speaker or its cable in water or other liquids.
to switch the light effect on the top.
button for 8 seconds to disconnect the Bluetooth
9
EN