ABC Design Zoom Carry Cot Instructions De Service page 4

7. Anbringen der Beindecke
Stülpen Sie den geschlossenen Teil der Beindecke über das Fußende
der Tragetasche.
Ziehen Sie die Beindecke über die Tragetasche.
Befestigen Sie die Enden der Beindecke mit dem dafür
vorgesehenen Klettverschluss an der Außenseite des Verdecks.
8. Montage der Tragewanne am Kinderwagen
Auf der langen Seite der Tragewanne ist der Adapter angebracht.
Setzen Sie die Tragewanne so auf Ihren Kinderwagen, dass der
Befestigungsmechanismus einrastet.
Um die Tragewanne wieder abzunehmen, drücken Sie an beiden
Seiten der Wanne den Knopf am Adapter und heben die Wanne an,
damit sie ausrastet.
WARNUNG: Es ist vor Gebrauch zu überprüfen, dass die Tragewanne
korrekt am Kinderwagen befestigt ist.
DE - 04
7
8
8
• Carrycot designed to fit the "Zoom" model
• Tested for conformity with EN 1466:2004
• Mattress included
• Weight: 4.0 kg
Care instructions
• The materials used to manufacture our products comply with the AZO requirement, EN71-2 and EN71-3, and light fastness
standards for textiles. Nevertheless, we advise you not to leave the product exposed to bright sunlight for any length of time. No
claims may be made for wear and tear or if the colours fade when exposed to strong sunlight. The fabric covers on this product
can be washed by hand or on a cold cycle in the washing machine (mild detergent).
• All the frames on our products have been tested for conformity with EN1888 : 2005 and have met the required standards. In
order to maintain the safety of the product it is necessary to oil the moving parts or tighten the rivets as and when required.
NB: Please do not use any product for lubrication other than silicone oil or silicone spray lubricant.
• Regular care and upkeep have a major part to play in maintaining the safety and value of the product. Exposure to such things
as salt in the air, road-gritting salt or acid rain will encourage the onset of corrosion, as will inappropriate storage of the product.
Safety instructions
Read these instructions carefully before use and keep them for future reference. Failure to read these instructions may
compromise the safety of your child.
NB:
• For use on a firm horizontal surface only.
• Do not use spare parts other than those supplied or approved by the manufacturer.
• Be aware of the risks posed by naked flames and other sources of heat, such as electric heaters, gas flames, etc., which are in
the immediate vicinity of the carrycot.
• Check the handles and base regularly for damage and signs of wear.
CAUTION:
• This product is designed to hold one child who cannot sit up.
• Do not leave other children unsupervised in the vicinity of the carrycot.
• Do not use the carrycot if parts are broken, ripped or missing.
• Only for use with mattresses up to 50 mm thick.
• If the carrycot is mounted on the pushchair check before use that the cot is correctly clicked into place.
• Do not make any modifications to the product which compromise its safety.
Customer complaints
• No claims may be made for natural wear and tear or for damage caused by undue demands on the product or by exceeding the
permissible load.
• No claims may be made for damage caused by improper use.
• No claims may be made for damage caused by incorrect assembly or operation.
• No claims may be made for damage caused by improper modifications to the product.
• Areas of rust may appear through lack of maintenance or improper care and do not constitute a fault with the product.
• Scratch marks are normal signs of wear and do not constitute a fault with the product.
• Mildew is likely to appear on textiles which are not dried out after getting wet and cannot be attributed to shortcomings in
production conditions.
• The product may fade if exposed to sunlight, perspiration and detergents, or if subject to abrasion or excessive washing,
therefore fading cannot be attributed to a fault with the product.
EN - 05