Voice Control; Important - Geemarc CLA-40 VOX Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

INSTALLATION
1 - HOW TO SET THE BATTERY
The CLA-40VOX amplifier needs with a 9V PP3 battery (not provided).
To insert the battery into the amplifier:
- Open the battery compartment located on the base by pressing the small
plastic lock.
- Insert the 9V battery with the correct polarity into the connector in the battery
compartment.
- Replace the battery cover.
- The amplifier is now ready to be connected to the phone.
2 - HOW TO CONNECT THE CLA-40VOX TO THE PHONE
To connect your phone to the CLA-40VOX amplifier:
- Unplug the handset from your telephone base socket.
- Connect the small lead supplied with the CLA-40VOX to the telephone base
socket and to the inputsocket (1) located at the top of yourCLA-40VOX .
- Connect your handset curly cord to the output socket (2) located at the front
of your CLA-40VOX.

VOICE CONTROL :

As soon as the CLA-40VOX will detect a voice, a
sound from the earpiece or the microphone, it will turn ON automatically ( LED
lit) then during a silence more than 15secs it will also turn OFF automatically.

IMPORTANT:

The CLA-40VOX cannot be used with one-piece telephones
which have a keypad on the handset.
8

Publicité

Table des Matières
loading

Table des Matières