Quick Installation - Cudy LT500 Guide D'installation Rapide

Quick Installation

1. Insert the Micro SIM card into the slot until you hear a click.
LAN1 LAN2 LAN3
Micro SIM
SIM card requirement
+
+
Micro SIM Nano SIM Micro SIM
card card card adapter
Size: Use a micro SIM card, or manually convert a nano SIM card using the SIM card
adapter.
Note: To prevent damage, do not insert a nano SIM card directly, and do not insert an
empty SIM card adapter or any other object into the slot.
Direction: With the gold contacts facing down, gently slide the SIM card into the slot.
2. Connect power adapter and turn on the router. Waiting for 2 minutes
for it to start.
3. Check the status of the system LED.
If the system LED turns to solid blue, means connect to 4G network successfully.
If the system LED turns to solid purple, means connect to 2/3G network.
If the system LED turns to solid red, please follow the instructions of
the 4G Router.
LAN4/WAN Micro SIM WPS RESET POWER
1
2
Empty SIM Nano SIM Standard
card adapter card SIM card
— 1 —
Customize The 4G Router
1. Connect the router via ethernet cable or Wi-Fi. Network name and
password is printed on the bottom of the router.
Note: For LT450 and LT500, the device will create two WiFi signals, 2.4GHz WiFi network name
is Cudy-XXXX, 5GHz WiFi network name is Cudy-XXXX-5G.
2. Launch a web browser and enter
in the address bar, use admin as password to login.
3. Below page would pop up if your SIM card needs PIN to unlock. Please
enter your PIN and click Save & Apply, then wait 15 seconds to connect
to the Internet.
Customize
4G LTE Wi-Fi Router
Wi-Fi: Cudy-XXXX
Password: XXXXXXXX
http://cudy.net/
http://cudy.net/
Auto
admin
Password
Log In
4G Settings
The SIM is locked, please enter the PIN code. You have
3 attempts at most for entering the PIN code.
PIN
Save & Apply
— 2 —
EN
(or http://192.168.10.1/)