GGP ITALY BLV 48 Li Manuel D'utilisation page 80

Keep bystanders away
Keep all bystanders, especially
children and pets, at least
15m from the operating area.
Impeller Blades
Rotating impeller blades can
cause severe injury.
Do not touch the fan when
operating this unit.
Wet conditions alert
Do not expose to rain or damp conditions.
The following signal words and meanings
are intended to explain the levels of
risk associated with this product.
ndicates an imminently
DANGER: I
hazardous situation, which, if not
avoided, will result in death
or serious injury.
WARNING: Indicates a potentially
hazardous situation, which, if not avoided,
could result in death or serious injury
CAUTION! Indicates a potentially
hazardous situation, which, if not avoided,
may result in minor or moderate injury.
CAUTION: (Without Safety Alert
Symbol) Indicates a situation that may
result in property damage.
3. DESCRIPTION
1. Variable switch
2. Low/high button
3. ON/OFF button
4. Auxiliary handle
5. Mulch/vacuum gate
6. Lock button
7. Blower tube
8. Mulcher tube
9. Bag
10. Notched area
11. Air outlet
12. Slot
13. Tab
14. Strap
15. Identification plate
15.1) EC Conformity marking
15.2) Name and address of the manufacturer
15.3) Guaranteed sound power level
15.4) Machine model
15.5) Serial number
All manuals and user guides at all-guides.com
15.6) Year of manufacture
15.7) Power supply frequency and voltage
15.8) Motor power
15.9) Article Code
15.10) Manufacturing country
As soon as you have purchased the
machine, do not forget to write the
identification numbers (S/n) in the spaces
on the last page of the manual.
The example of the Declaration of Conformity is
provided on the penultimate page of the manual.
UNPACKING
• Carefully remove the product and
• Inspect the product carefully to
• Do not discard the packing material
• If any parts are damaged or missing, please
The blower vac is supplied with some components
not assembled. To assemble these, proceed as
follows:
ASSEMBLE AS A MULCHER
See Figure 2.
• Slide the front and rear mulcher tubes
• Pull the lock button forward to disengage
• Insert the "wedged" end clip of the mulcher
• To remove mulcher tubes,
• Insert the bag adaptor into the blower
the blower tube or mulcher tubes to
clear a blocked tube or impeller.
could cause serious personal injury,
always remove the battery pack from
the blower when assembling parts.
4
4. ASSEMBLY
any accessories from the box.
make sure no breakage or damage
occurred during shipping.
until you have carefully inspected and
satisfactorily operated the product.
call your Tools service centre for assistance.
together until locked. (See fig 2)
the gate.Hold the gate open. (See fig 2.1)
tube into the rear clip. (See fig 2.2). Push the
"hooked" end clip of the mulcher tube into the
front clip. (See fig 2.3). Press the lock button
back to engage the mulcher tube. (See fig 2.4)
follow the steps(3) (2) (1).
outlet. Lock the bag adaptor with the lock
button. To remove the bag, simply press
lock button and remove bag. (see Fig.4).
NOTE It may be necessary to remove
To prevent accidental starting that