FlyCamOne
2
Status of the battery
Battery power is displayed in percent as following:
,
,
and
for charge.
180° turned recording
Pressing the shutter button a second time after "
" is displayed, the following modes are displayed turned by 180°. Recording is now upside down.
Memory voll [
]
Records can´t be made until datas from the SD-card will be deleted.
Delete [
]
Deletes the last record, doesn´t matter whether it was a video or photo.
Mounting of the baseplate
The FCO² baseplate can be fixed nearly everywhere by the supplied velcro-pad. The FCO² and the baseplate are ready for external power and triggering
complies to the shutter button [2]. The contacts are located on the back of the FCO² and on FCO² baseplate as well.
After fixing the baseplate, press the camera on it carefully and pull it, as imaged, a little bit to the back.
2
The FCO
Baseplate is appointed with 4 contacts. Allocation as follows:
1 signal | 2 signal | 3 earth | 4 +5 V min. 500mA
www.FlyCamOne.com