DreamLED SLWL-300 Manuel D'utilisation page 4

OPERATION
The SLWL-300 has 3 lighting modes, which can be selected using the ON/OFF button :
1. MODE 1: 30% LIGHT + DIM OFF
Press the ON/OFF button 1x to select mode 1. The lamp will turn ON automatically
at night (<30 LUX) at 30% of full light. The lamp will remain ON for max. 4~5 hours
after which it turns OFF.
2. MODE 2: FULL LIGHT + DIM ON/OFF
Press the ON/OFF button a 2nd time to select mode 2. The lamp will turn ON
automatically at night (<30 LUX) at full light (100%) when motion is detected in the
detection range. About 25 seconds after the last motion has been detected it turns to
3% of full light and keeps on working till the morning time or till the battery is empty.
3. MODE 3: FULL LIGHT ON/OFF
Press the ON/OFF button a 3rd time to select mode 3. The lamp will turn ON
automatically at night (<30 LUX) at full light (100%) when motion is detected in the
detection range. About 25 seconds after the last motion has been detected the lamp
turns OFF.
If you press the ON/OFF button a 4th time, the lamp is turned OFF completely. The solar
cells will charge the battery without activating the lamp. Leave the lamp in this position
for at least 2 or 3 sunny days so the battery can be fully charged before using it.
CLEANING
Make sure the solar panel is kept dust free and clean. Clean it regularly (1x per month)
with a dry cloth and with warm, soapy water. Dirty solar panels may not fully charge the
battery. This can lead to premature aging of the battery and may result in unreliable
operation of the device.
-4-