Sauder 418793 Manuel D'instructions page 22

Step 17
Refer to the enlarged diagram to identify the parts on the HINGES and
å
HINGE BRACKETS.
The DOOR may need some adjustments. Follow the text below to
å
make needed adjustments.
DOOR ADJUSTMENTS:
å
To adjust the DOOR from side to side (horizontal), turn the adjusting
å
screw in or out.
To adjust the DOOR up and down (vertical), loosen both screws that
å
asten the HINGE BRACKETS to the END. Move the DOOR up or down
to the desired location. Tighten the screws after making adjustments.
To adjust the DOOR in or out (depth), loosen the mounting screw one
å
turn and move the DOOR in or out, as needed. Tighten the mounting
screw after making adjustments.
Page 22
Adjusting screw (horizontal)
418793
Mounting screw (depth)
(vertical adjustment)
www.sauder.com/services