LEGRAND 0 676 95 Mode D'emploi page 6

Start configuration of the 4-scenario pocket remote control
Press the gateway power module configuration button or the middle of the Home/Away
wireless master switch until the LED briefly lights up green, then release. All the LEDs on the
wired products light up with a steady green light.
> 3 s
Prepare the 4-scenario pocket remote control
1
2
Remove the
3
protective tab
4
OR
1
2
3
4
The LED on the 4-scenario pocket remote control will
flash green and then switch off.
Your 4-scenario pocket remote control is ready to
use.
Briefly press one of the buttons
on the 4-scenario pocket remote control
to activate it, the LED flashes green.
6
1
2
3
4